Modded TPC

[greenmtn]

So,

No hard numbers or extensive data for you guys at this point but I did get The Prototype TPC out today and get a chance to play with it.  It was about 60-65 degrees today and threatening rain.

I was using my Gargoyle chronoing in in the mid to high 270s with green madman valve spring, red CCI main spring, stock bolt, TPC and Hammer for the first two games to get a control against which to compare the performance of the ASP TPC.  This setup got me about 30-35 shots per 12ie.

After the first two games I put the ASP TPC in and anticipating a velocity spike I changed to the silver CCI Main spring to counter the increased velocity.  The TPC was out pretty far maybe 1 turn in from the lowest velocity setting and I was chronoing in the low to mid 270s.  With this setup I was getting approximately 38 shots.

So my initial findings with this TCP are that it seems to increase efficiency approximately 10%

I should probably also note that I was using Valken paint (field grade) from the Gravity League event last weekend, approximately .679 (+/- .03).

Again this is a start of the testing.  More information will be had when we get back from the Honeymoon.

[rolondo]

THAT is pretty dang cool. 

[greenmtn]

I loose, I never updated this thread with numbers, Once I can get back to MCB I'll steal my numbers off the thread about this on there and get this thread updated.

ASP now has the hammers for sale in limited numbers, the TPC's are not yet available to the best of my knowledge.

[Have Blue]

I finally have 30 or so unmodified TPCs in from CCI.  Will probably be working on them over the holiday break.

[greenmtn]

Here is some data

Data
"Controls"- Barrel 11" CCI .686 bore, Gargoyle, Madman green valve spring, CCI P.T., Leland 12ies,
Temp:61*F
Paint: DXS field grade, ~.678-~.683 depending on how it landed in the chamber and which ball it was.
(t after a number indicates that I adjusted the TPC after that shot, 00 indicates no reading on the chrony)
Data:
ASP TPC, Silver CCI main spring
297t,287t,322t,264,277,292,296t,282,286,253,278,26 9,283,268,295,268,288,264,258,261,250,248,241,257, 295,281,257,287,276,266,257,275,267,267,238,270,21 9,222, 00
Notes: noise made at last cocking motion to indicate the end of the 12ie, after last adjustment of the TPC the TPC was out ALL THE WAY

ASP TPC Blue main Spring (TPC in about .75-1 turn)
234t,267,249,275,286,290,286,264,258,289,278,254,2 81,283,257,278,254,278,257,274,256,298,257,277,274 ,242,259,00,286,248,271,259,258,243,248,261,256,00 ,00,00,00
Notes: Last 4 shots hissed indicating end of 12ie

Everything the same as the previous test, ASP lightened Hammer in place of CCI stock hammer

00t,200t,244t,238t,246,273,277,258,268,263,266,245 ,256,273,289,266,273,278,260,263,289,261,265,00,27 7,00,00,258,288,289,284,00,00,287,289,249,274,257, 262,217,219,00,00,00